You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

This section defines the settings of actions using a smart card within the frame of smart card usage policy. The description of section parameters is given in the Table 4.

Table 4 – Settings of smart card actions.

OptionDescriptionDefault value
Add card automatically

Add the smart card to the system (if it wasn’t added earlier) when issued or assigned to user. If the option is disabled, then it is prohibited to issue or assign the card that is connected to a computer but not added to the system.

Disabled
Enable PIN reset

Enables the administrator to reset PIN codes of user smart cards.

Enabled
Enable offline unlock

Makes it possible to unlock a user smart card with system administrator assistance when there is no connection between the user workstation and Indeed CM server.

To unlock his or her smart card, the user must know answers to the security questions.
Validation of answers to security questions for smart card unlocking can be disabled if necessary (Validate answers to security questions option).

Enabled

Enable cancel of card updating

Allows the Indeed CM administrator or operator to cancel updating of the user smart card contents.

Enabled
User can add card

This option allows to issue a card, not yet added to the system. The card will be added to the system automatically while issuing. The option is available only if the Add card automatically option is enabled.

Disabled
User can assign card

This option allows to issue a card, not assigned to the user by the administrator.

Disabled
User can revoke card

This option allows the user to revoke his or her smart card.

Enabled
User can enable card

This option allows user to enable his or her smart card (if it was disabled earlier).

Enabled
User can disable card

This option allows the user to disable his or her smart card (if it was enabled earlier).

Enabled
User can clear card

This option allows the user to clear up the contents of his or her smart card when it is revoked by an operator with Card removal and Card update reasons. The smart card remains assigned to the user after clearing.

Disabled
User can reset PIN

The user is allowed to reset PIN code of his or her smart card.

Disabled
User can update card

This option allows the user to update certificates on his or her card if they expired or expire shortly.

Enabled

User can select optional certificates

If enabled, the user can select the certificates (from the optional ones) to be written to the smart card, while issuing it in the Self Service application.

If disabled, then the certificates marked as optional in the smart card issuing policy, would not be written to the card.

Disabled

User can issue AirKey card

If enabled, the users can issue AirKey cards in Self Service application on their own.

AirKey card issuance is only possible if integration with с Indeed AirKey Enterprise is set up.

Disabled

User must answer the security questions on first logon to self-service

If enabled, the user must define security questions and answers to those after logging into Self Service application for the first time. These questions will be used for user authentication later.

If disabled, then the form for security question setup is not displayed upon logging into Self Service. A user can define the security questions later at any time.

Enabled

Enable certificate tracing

If enabled, the Indeed CM will search for certificates and corresponding private keys on the smart card. The Indeed CM can send corresponding email notifications when such certificates are about to expire.

Disabled


  • No labels