Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Warning

When you switch to a unified log for all servers, you will not be able to access data about previous local events recorded in Events section. These events are saved in the Windows Axidian CertiFlow/Operational log on each CertiFlow server.

To record events from all CertiFlow servers in one log, configure each server to work with a unified event log.

Follow these steps to configure CertiFlow server to work with unified event log:

Log in to the CertiFlow server as a local administrator.

  1. Run the Axidian CertiFlow Configuration Wizard (Start – All Programs – Axidian).
  2. Go to Event Log section.
    • Click Enable Axidian CertiFlow Event Log Proxy if the you use Event Log Proxy application is used for the unified event log, and specify:
      • Event Log Proxy URL  URL of the remote log service.

        Info
        iconfalse

        https:///<Workstation FQDN><Workstation FQDN>/cm/eventlogroxy


      • Service account for event log proxy username for connecting to the eventlogproxy service (from the <authorization> section of the Web.config file of the eventlogproxy application).
    • Select Use Axidian Log Server if the unified event log is configured via the Axidian Log Server application and specify:
      • Axidian Log Server URL – URL of the remote log service.

        Info
        iconfalse

        https://<Workstation FQDN><Workstation FQDN>/ls/api


4. Go to the Confirmation section and click Apply.
5. Configure to work with a unified event log by repeating steps 2-If you have a multi-server configuration, follow steps 2 through 4 on each CertiFlow server in the system.

Note

For security reasonswe recommend that you disable the Axidian CertiFlow Configuration Wizard after you complete the system configuration

6. Go to Open the Axidian CertiFlow Management Console in a browser and run a search in the Events section.
Expected Result: no errors.

Warning

A search in the Events may not produce results if the log on the remote server does not contain any events. Perform on the CertiFlow server configured to work with a unified event log any action the result of which is written to the Events (disabling the smart card, adding or changing comments, etc.) and repeat the search for events.