Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Warning

When you switch to a unified log for all servers, you will not be able to access data about previous local events recorded in Events section. These events are saved in the Windows CertiFlowAxidianCertiFlow/Operational log on each CertiFlow server.

To record events from all CertiFlow servers in one log, configure each server to work with a unified event log.

Follow these steps to configure CertiFlow server to work with unified event log:

  1. Log in to the CertiFlow server as a local administrator.
  2. Run the Axidian CertiFlow Configuration Wizard (Start – All Programs – Axidian).
  3. Go to Event Log section.
    • Click Enable Axidian CertiFlow Event Log Proxy if the you use Event Log Proxy application is used for the unified event log, and specify:
      • Event Log Proxy URL  URL of the remote log service.

        Info
        iconfalse

        https://<Workstation FQDN>/certiflowcm/eventlogroxy


      • Service account for event log proxy username for connecting to the eventlogproxy service (from the <authorization> section of the Web.config file of the eventlogproxy application).
    • Select Use Axidian Log Server if the unified event log is configured via the Axidian Log Server application and specify:
      • Axidian Log Server URL – URL of the remote log service.

        Info
        iconfalse

        https://<Workstation FQDN>/ls/api


4. Go to the Confirmation section and click Apply.
5. Configure to work with a unified event log by repeating steps 2-If you have a multi-server configuration, follow steps 2 through 4 on each CertiFlow server in the system.6

Note

For security reasonswe recommend that you disable the Axidian CertiFlow Configuration Wizard after you complete the system configuration


6. Open . Go to the Axidian CertiFlow Management Console in a browser and run a search in the Events section.
Expected Result: no errors.

Warning

A search in the Events may not produce results if the log on the remote server does not contain any events. Perform on the CertiFlow server configured to work with a unified event log any action the result of which is written to the Events (disabling the smart card, adding or changing comments, etc.) and repeat the search for events.